How Much Do I Need Start A Vulcanizing Tire Repair, Alignment And Wheel-Balancing Shop Business In Nigeria
Call it a dirty jobs, but how does that matter when it puts food on the table and keeps life going? Then, it’s good business. Vulcanizing business is good business and for your car and car tyres to be road-worthy and safe to drive, you must visit the Vulcanizer’s shade. Vulcanizer business entails the fixing, pumping and gauging of car tires for people. In this business, you will be involved in remove a rim from tires, then the tyre, pump a tyre itself, ready for inspection and sealing and/or pumping.
Call it a dirty jobs, but how does that matter when it puts food on the table and keeps life going? Then, it’s good business. Vulcanizing business is good business and for your car and car tyres to be road-worthy and safe to drive, you must visit the Vulcanizer’s shade.
Vulcanizer business entails the fixing, pumping and gauging of car tires for people. In this business, you will be involved in remove a rim from tires, then the tyre, pump a tyre itself, ready for inspection and sealing and/or pumping.
The vulcanizer (or vorka) is so imbedded in the auto mentality in Nigeria, that some people go their whole lives never having to change a spare tyre or perform any tyre related repair work on their vehicles. You can earn as much as =N=2,500 daily just pumping tyres not to talk of patching them.
A vulcanizer is a person who does any maintenance or repair work on any type of tyre whether that of a bicycle, motorcycle or car tyres.
Their services include: –
• Checking tire pressure
• Inflating low or flat tyres
• Sealing up punctured tyres
• Replacing tyre tubes
• Repairing or changing rim
• Replacing tyres with spares
• Selling used tyres, etc.
The vulcanizing business is a lucrative and good business venture because of the millions of vehicles on Nigerian roads. Most vehicles are either used or second hand vehicle imported into the country. Bad roads, substandard tyres and poor maintenance culture are also factors that contribute to the lucrative nature of the vulcanizer business.
For any car or car tyres to be road-worthy and safe to drive, a visit to the vulcanizer shade is a must. The average motorist (I go drive myself and women especially) would rather patronize a vulcanizer than change the tyres themselves.
How to Setup a Vulcanizing Business
Training and Certification:
The best way to become a vulcanizer is through apprentice arrangement. This could last up to a year and after graduation (or freedom), the graduate vulcanizer is presented with his tools. Another way is to pay to learn for a specified period of between one to three months or through trade institutions, vocational school or practical workshops.
The basic equipment include the following:
• Pumping machine
• Tyre patches
• Iron bar
• Adhesive material
• Tubes pliers
• Carjack, etc.
Cost and Financial Commitment
The amount needed to start this business is among the lowest in business startups. All you need is between =N=75,000 to =N=100,000 to get the machine used in pumping tyres and a set of tools. There are various brands of the major equipment in the market, which comes with different prices. You could start with a fairly used one which would cost about =N=40,000.
Location [Choose a location where you will be patronized on a regular basis!]
This is one area any go-getting or determined vulcanizer had to pay very close and special attention; a good choice will impact your overall income positively. Go for a spot on major roads, or close to highways. Aside deflated tyres, some vehicle owners pump their tyres on regular basis for better handling and balance of their cars when driving.
Association and Levies (or Tax)
It is obligatory to join the local vulcanizing association in your area of operation to avoid harassment and obstructions. You will need to pay the membership association fees including local government taxes and levies. The vulcanizing business is easy to establish. You need low startup capital, basic knowledge of the trade, equipment and a good location.
Top 10 Equipment Needs for Opening an Auto Repair Shop
The goal of many skilled auto mechanics is to open their own auto repair shop at some point in their career. However, putting up an efficient, profitable shop will require much more than mechanical skills.
There are a number of repair equipment needs that will be essential in performing even the most basic repairs quickly and reliably for your customers.
When to Start the Business and Purchase Equipment
Once you’ve completed mechanical and diagnostic training, the best career path is to either work for another shop or dealership as a mechanic, to hone your skills and gain experience. This will also give you the time to earn enough money to begin acquiring the equipment you will need to operate your own auto repair shop.
Auto repair equipment that you will need to get your shop ready for business may include:
1. Air compressor
You will need a reliable air compressor to operate many tools within your shop, including pneumatic hand tools and some auto lifts. Get the highest capacity you can afford, to be sure you have the power you need for powering the needs of your shop – a good example would be a 60 or 120-gallon compressor.
2. Jack, jack stands, and pole jacks
Many auto repairs will require raising the vehicle at least temporarily, so a strong floor jack will be utilized on a regular basis. Get a high-quality, high-capacity jack, and strong jack stands to support the vehicle once it has been elevated. Pole jacks will also be useful to support axles or other components of raised vehicles.
3. Oil drain and oil caddy
Services like changing oil and transmission fluid will require an oil caddy with enough capacity to contain the largest fluid volume anticipated. As your services expand and you’re working with vehicles on lifts, a standing oil caddy that can reach the raised vehicle will make the job easier and quicker.
4. Battery charger and jumper
Many jobs will pertain to dead batteries or charging problems. Your shop will need a good battery charger and jumper to handle these services.
5. Engine hoist
If you’re doing serious engine work that will require removal of the engine for repairs, rebuilds, or replacement, an engine hoist is a must. Be sure to purchase one that has the capacity to handle the largest engine you expect to service.
6. Brake lathe
Sure, when you’re doing brake jobs, you can take rotors or drums to another service for resurfacing, but that’s expensive and cuts significantly into your profits. Buying your own brake lathe will make brake services more efficient and profitable, paying for themselves quickly. Be sure to purchase a name brand lathe, to ensure availability of replacement parts when needed.
7. Strut compressor
A good strut compressor will be extremely useful when replacing struts or working on suspension systems. Having this item will add to your service capabilities and help make your auto repair business profitable.
8. Air conditioning machine
If you’re going to offer air conditioning service, get an A/C machine that will facilitate recovering, recycling, and recharging vehicle A/C systems. This will make flushing and diagnosing A/C systems faster and more reliable.
There will be many uses for a good press in your shop – working with bearings, bushings, bending metal, and much more.
10. Transmission jack
Transmission work is much easier and efficient when you have the appropriate method of supporting a heavy transmission. Jacks come in various handling capacities and features. So get one that meets the needs of the services you offer and that will handle a variety of transmission makes and weights.
Additional Auto Repair Equipment Needs
Your business will additionally need these items to perform day-to-day services:
Every mechanic needs to get under the vehicles to perform essential inspection and diagnostics. Your shop will need lifts to raise the vehicle to the height needed for these services.
Match your needs to the various models and capacities of lift models. There are many characteristics to be considered, including safety features, 2-post vs. 4-post construction, accessories, and power requirements.
Be sure to purchase lifts that are of high quality and name brand, to ensure availability of parts and service. Lifts are an important investment for your repair shop, as they are built to last many years.
Workbench with vise
Working on parts will typically be done on your workbench. Make sure you have a durable, sturdy, metal workbench that will stand up to heavy-duty work such as hammering that may be necessary to separate frozen parts.
Click here to get the complete guide on the above business plan Click Here
Uses of this Business Plan (PDF and Word)
This business plan can be used for many purposes including:
• Raising capital from investors/friends/relatives
• Applying for a bank loan
• Start-up guide to launch your business
• As a business proposal
• Assessing profitability of the business
• Finding a business partner
• Assessing the initial start-up costs so that you know how much to save
• Manual for current business owners to help in business and strategy formulation
Contents of this Business Plan (PDF and Word)
This business plan include:
• Marketing Strategy
• Financial Statements (monthly cash flow projections, income statements, cash flow statements, balance sheets, break even analysis, payback period analysis, start-up costs, financial graphs, revenue and expenses, Bank Loan Amortization)
• Industry Analysis
• Market Analysis
• Risk Analysis
• SWOT & PEST Analysis
• Operational Requirements
• Operational Strategy
• Why some people in this business fail, so that you can avoid their mistakes
• Ways to raise capital to start your business